Results 21 - 30 of 146

• Using the Coal Mine Roof Rating (CMRR) to Assess Roof Stability in U.S. Coal Mines
  8/1/2001 - Peer reviewed journal articles
  The CMRR quantifies defects in the rock mass and compiles a strength value used for engineering design. The CMRR has been applied to a number of ground stability problems. The CMRR procedure and some of these applications are described in this paper.
• Toward Pillar Design To Prevent Collapse of Room-and-Pillar Mines
  2/1/2001 - Conference papers
  Three alternative approaches to reduce the risk of catastrophic collapse are described: containment, prevention, and full-extraction. Without good data available on post-failure pillar behavior, containment and full-extraction are the safest.
• Optimizing Secondary Roof Support with the NIOSH Support Technology Optimization Program (STOP)
  8/1/2000 - Conference papers
  The 1990s saw an unprecedented increase in technologies for more effective, easier to install roof support in underground mines. To facilitate application and improve mine safety, NIOSH developed the Support Technology Optimization Program (STOP).
• Analysis of Safety Aspects and Mining Practices for Effective Ground Control in Surface Mining
  8/1/2000 - Conference papers
  To determine causes of slope failure and highwall/spoilbank failure, this study reviews accident statistics, surface mining laws, the relevant literature, and observations from mine visits. The study emphasizes surface mines in WV, OH, and PA.
• Application of the Coal Mine Roof Rating (CMRR) to Extended Cuts
  4/1/1999 - Peer reviewed journal articles
  The Coal Mine Roof Rating (CMRR) has been widely accepted as a tool for geologic characterization and mine planning. The application of the CMRR to extended cuts (cuts greater that 6 m (20 ft) in length) is discussed.
• Controlling Roof Beam Failures From High Horizontal Stresses in Underground Stone Mines
  8/1/1998 - Conference papers
  A design technique is presented which provides stone miners with a method for making stability assessments. The consequences of widening rooms, changing geology and horizontal stresses, and different rock bolts on roof beam failure are discussed.
• Proceedings: New Technology for Ground Control in Retreat Mining
  3/1/1997 - Information Circulars
  This proceedings volume contains papers presented at technology transfer seminars sponsored by the National Institute for Occupational Safety and Health (NIOSH) on New Technology for Ground Control in Retreat Mining.
• Exploration of Limestone Pillar Stability in Multiple-level Mining Conditions Using Numerical Models
  5/17/2023 - Peer reviewed journal articles
  A study using FLAC3D models to investigate factors that control pillar stability in multiple-level conditions.
• Underground Stone Mine Pillar Design in Challenging Conditions
  1/13/2023 - Research projects
  A project to build the framework for expanding pillar design criteria into challenging environments by undertaking pillar response investigations in representative conditions at case study mine sites.
• MIS Analysis and DINSAR Measurements – Tools for Improving Mine Ground Control Safety
  9/18/2020 - Contracts and cooperative agreements
  A capacity-building contract with the University of Utah to improve seismic coverage, instrument a yield pillar, develop an extended numerical model, and evaluate statistical methods.